Vehicle Standard (Australian Design Rule 4/01 – Seatbelts) 2006 (Cth)

Vehicle Standard (Australian Design Rule 4/014/01 – SeatbeltsSeatbelts) 20062006 I, JAMES ERIC LLOYD, Minister for Local Government, Territories and Roads, determine this vehicle standard under subsection 7 (1) of the Motor Vehicle Standards Act 1989.

Dated 31 July 2006

[SIGNED]

James Eric Lloyd

Minister for Local Government, Territories and Roads

CONTENTS

0. legislative provisions.............................................. A. Function and SCOPE.............................................. B. APPLICABILITY................................................ C. Applicability Table............................................... 4.1. DEFINITIONS................................................... 4.2. REQUIREMENTS................................................ 4.3. ADJUSTMENT REQUIREMENTS.................................. 4.4. BUCKLE REQUIREMENTS....................................... 4.5. GENERAL REQUIREMENTS FOR SEATBELT COMPONENTS......... 4.6. RETRACTORS (other than 'Type 4N Retractors', for which see Appendix A). 4.7. DYNAMIC TEST REQUIREMENTS................................ 4.8. RETRACTOR DURABILITY TEST................................. 4.9. DYNAMIC TESTING PROCEDURE................................ 4.10. TEST DUMMY REQUIREMENTS.................................. 4.11. DUMMY CALIBRATION......................................... 4.12. TEST RIG CALIBRATION........................................ 4.13. COMPONENT BOUNDARY LOCATION............................ 4.14. DETAILED REQUIREMENTS FOR VEHICLE CATEGORIES MD3, MD4, ME, NB2 AND NC ONLY 4.15. CORROSION CONDITIONING PROCEDURE FOR SEATBELT ASSEMBLIES FITTED IN ACCORDANCE WITH CLAUSE 4.14 4.16. ADJUSTMENT REQUIREMENTS FOR VEHICLE CATEGORIES MD3, MD4, ME, NB2 AND NC ONLY 4.17. ALTERNATIVE STANDARDS..................................... Appendix A............................................................