Vehicle Standard (Australian Design Rule 5/02 – Anchorages for Seatbelts) 2006 (Cth)

Vehicle Standard (Australian Design Rule 5/025/02 – Anchorages for SeatbeltsAnchorages for Seatbelts) 20062006 I, JAMES ERIC LLOYD, Minister for Local Government, Territories and Roads, determine this vehicle standard under subsection 7 (1) of the Motor Vehicle Standards Act 1989.

Dated 31 July 2006

[SIGNED]

James Eric Lloyd

Minister for Local Government, Territories and Roads

CONTENTS

0. legislative provisions.............................................. A. function and SCOPE.............................................. B. APPLICABILITY AND IMPLEMENTATION......................... C. Applicability Table............................................... 5.1. DEFINITIONS................................................... 5.2. REQUIREMENTS................................................ 5.3. 'SASH GUIDE' REQUIREMENTS.................................. 5.4. LOCATION OF 'ANCHOR POINTS' AND 'SASH LOCATION POINTS'.. 5.5. TESTING OF 'ANCHORAGES' 5.6. TEST OF 'SASH GUIDE'......................................... 5.7. SEATING POSITIONS............................................ 5.8. Not used........................................................ 5.9. 'AREA A' AND 'AREA B'......................................... 5.10. GENERAL REQUIREMENTS FOR 'ANCHORAGES' FOR VEHICLE CATEGORIES MD3, MD4, ME, NB2 AND NC ONLY 5.11. REQUIREMENTS FOR 'CHILD RESTRAINT ANCHORAGES' (LEP, MA, MB, MC AND MD1 VEHICLES ONLY) 5.12. ALTERNATIVE STANDARDS.....................................

0. legislative provisions 0.1. NAME OF STANDARD 0.1.1. This Standard is the Vehicle Standard (Australian Design Rule 5/02 – Anchorages for Seatbelts) 2006. 0.1.2. This Standard may also be cited as Australian Design Rule 5/02 — Anchorages for Seatbelts. 0.2. COMMENCEMENT 0.21. This Standard commences on the day after it is registered. 0.3 REPEAL 0.31. This Standard repeals each vehicle standard with the name Australian Design Rule 5/02 — Anchorages for Seatbelts that is: (a) made under section 7 of the Motor Vehicle Standards Act 1989; and