Vehicle Standard (Australian Design Rule 8/00 – Safety Glazing Material) 2006 (Cth)

Vehicle Standard (Australian Design Rule 8/008/00 – Safety Glazing MaterialSafety Glazing Material) 20062006 I, JAMES ERIC LLOYD, Minister for Local Government, Territories and Roads, determine this vehicle standard under subsection 7 (1) of the Motor Vehicle Standards Act 1989.

Dated 31 July 2006

[SIGNED]

James Eric Lloyd

Minister for Local Government, Territories and Roads

CONTENTS

0. legislative provisions.............................................. Purpose and SCOPE..................................................... APPLICABILITY....................................................... 8.0. DEFINITIONS................................................... 8.1. REQUIREMENTS FOR GLAZING MATERIAL....................... 8.2. MARKING OF GLASS............................................ 8.3. GLASS USED FOR WINDSCREENS................................ 8.4. SPECIFICATIONS FOR GLAZING MATERIAL.......................

0. legislative provisions 0.1 NAME OF STANDARD 0.11 This Standard is the Vehicle Standard (Australian Design Rule 8/00 – Safety Glazing Material) 2006. 0.12 This Standard may also be cited as Australian Design Rule 8/00 — Safety Glazing Material. 0.2 COMMENCEMENT 0.2.1 This Standard commences on the day after it is registered. 0.3. REPEAL 0.3.1. This Standard repeals each vehicle standard with the name Australian Design Rule 8/00 — Safety Glazing Material that is:

(a) made under section 7 of the Motor Vehicle Standards Act 1989; and

(b) in force at the commencement of this Standard.

0.3.2. This Standard also repeals each instrument made under section 7 of the Motor Vehicle Standards Act 1989 that creates a vehicle standard with the name Australian Design Rule 8/00 — Safety Glazing Material, if there are no other vehicle standards created by that instrument, or amendments to vehicle standards made by that instrument, that are still in force at the commencement of this Standard. Purpose and SCOPE