Vehicle Standard (Australian Design Rule 14/00 – Rear Vision Mirrors) 2006 (Cth)

Vehicle Standard (Australian Design Rule 14/0014/00 – Rear Vision MirrorsRear Vision Mirrors) 20062006 I, JAMES ERIC LLOYD, Minister for Local Government, Territories and Roads, determine this vehicle standard under subsection 7 (1) of the Motor Vehicle Standards Act 1989.

Dated 31 July 2006

[SIGNED]

James Eric Lloyd

Minister for Local Government, Territories and Roads

CONTENTS

0. legislative provisions.............................................. purpose and SCOPE...................................................... APPLICABILITY....................................................... 14.1. DEFINITIONS................................................... 14.2. REQUIREMENTS FOR VEHICLE CATEGORIES MA; MB; MC; and MD1 ONLY 14.3. TEST PROCEDURES FOR VEHICLE CATEGORIES MA; MB; MC; and MD1 ONLY 14.4. REQUIREMENTS FOR VEHICLE CATEGORIES MD2; MD3; ME; AND N-GROUP VEHICLES ONLY 14.5. REQUIREMENTS FOR L-GROUP VEHICLES ONLY 14.6. ALTERNATIVE STANDARDS.....................................

0. legislative provisions 0.1. NAME OF STANDARD 0.1.1. This Standard is the Vehicle Standard (Australian Design Rule 14/00 – Rear Vision Mirrors) 2006. 0.1.2. This Standard may also be cited as Australian Design Rule 14/00 — Rear Vision Mirrors. 0.2. COMMENCEMENT 0.2.1. This Standard commences on the day after it is registered. 0.3. REPEAL 0.3.1. This Standard repeals each vehicle standard with the name Australian Design Rule 14/00 — Rear Vision Mirrors that is: (a) made under section 7 of the Motor Vehicle Standards Act 1989; and

(b) in force at the commencement of this Standard.