Vehicle Standard (Australian Design Rule 18/02 – Instrumentation) 2006 (Cth)

Vehicle Standard (Australian Design Rule 18/0218/02 – InstrumentationInstrumentation) 20062006 I, JAMES ERIC LLOYD, Minister for Local Government, Territories and Roads, determine this vehicle standard under subsection 7 (1) of the Motor Vehicle Standards Act 1989.

Dated 10 August 2006

[SIGNED]

James Eric Lloyd

Minister for Local Government, Territories and Roads

CONTENTS

A. legislative provisions.............................................. A.1. NAME OF STANDARD........................................... A.2. COMMENCEMENT.............................................. A.3. REPEAL....................................................... B. function and SCOPE.............................................. C. APPLICABILITY AND IMPLeMENTATION......................... C.1. Applicability Summary C.2. Applicability Table 18.1. DEFINITIONS................................................... 18.2. VISUAL INDICATORS FOR MA and LEP VEHICLES ONLY.......... 18.3. LOCATION OF VISUAL INDICATORS FOR MA and LEP VEHICLES ONLY 18.4. VISIBILITY OF VISUAL INDICATORS FOR MA and LEP VEHICLES ONLY 18.5. SPEEDOMETERS AND ODOMETERS (ALL VEHICLES).............

A. legislative provisions A.1. NAME OF STANDARD A.1.1. This Standard is the Vehicle Standard (Australian Design Rule 18/02 –Instrumentation) 2006.

A.1.2. This Standard may also be cited as Australian Design Rule 18/02 —Instrumentation.

A.2. COMMENCEMENT A.2.1. This Standard commences on the day after it is registered.

A.3. REPEAL A.3.1. This Standard repeals each vehicle standard with the name Australian Design Rule 18/02 — Instrumentation that is:

(a) made under section 7 of the Motor Vehicle Standards Act 1989; and

(b) in force at the commencement of this Standard.