Vehicle Standard (Australian Design Rule 62/00 – Mechanical Connections Between Vehicles) 2006 (Cth)

Vehicle Standard (Australian Design Rule 62/0062/00 – Mechanical Connections Between VehiclesMechanical Connections Between Vehicles) 20062006 I, JAMES ERIC LLOYD, Minister for Local Government, Territories and Roads, determine this vehicle standard under subsection 7 (1) of the Motor Vehicle Standards Act 1989.

Dated 3 September 2006

[SIGNED]

James Eric Lloyd

Minister for Local Government, Territories and Roads

CONTENTS

1. legislative provisions.............................................. 2. Function and SCOPE.............................................. 3. APPLICABILITY................................................ 4. DEFINITIONS................................................... 5. COUPLING REQUIREMENTS..................................... 6. TOWBAR REQUIREMENTS...................................... 7. DRAWBAR REQUIREMENTS..................................... 8. SAFETY CHAIN(S)

1. legislative provisions 1. NAME OF STANDARD 1. This Standard is the Vehicle Standard (Australian Design Rule 62/00 – Mechanical Connections Between Vehicles) 2006. 2. This Standard may also be cited as Australian Design Rule 62/00 — Mechanical Connections Between Vehicles. 2. COMMENCEMENT 1. This Standard commences on the day after it is registered. 3. REPEAL 1. This Standard repeals each vehicle standard with the name Australian Design Rule 62/00 — Mechanical Connections Between Vehicles that is: (a) made under section 7 of the Motor Vehicle Standards Act 1989; and