AD/UH-1/19 - Tail Rotor Slider (Cth)

AIRWORTHINESS DIRECTIVE For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.001(1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

Bell UH-1 Series Helicopters AD/UH-1/19 Tail Rotor Slider 12/2006

Applicability: Model HH-1K, TH-1F, TH-1L, UH-1A, UH-1B, UH-1E, UH-1F, UH-1H, UH-1L, and UH-1P helicopters, and Southwest Florida Model SW204, SW204HP, SW205, and SW205A-1 helicopters, with tail rotor (T/R) slider, part number (P/N) 204-010-720-3 or P/N 204010720-3 installed. Requirement: 1. Review the helicopter records to determine the Commercial and Government Entity (CAGE) code of the T/R slider. If necessary, remove the installed T/R slider to determine the CAGE code.

If the T/R slider is an FAA approved part; for example, an original equipment manufacturer (OEM) part, and has a legible CAGE code other than Code 15716 or 26098; no further action is required.

2. If you cannot determine whether the T/R slider is an FAA approved part and it contains no stamped CAGE code, an illegible stamped CAGE code, or is stamped with a CAGE code 15716 or 26098 then do the following:

a. Magnaflux inspect the T/R slider for a crack.

b If a crack is found, replace the cracked T/R slider with an airworthy T/R slider.