Federal Register of Legislation
AIRWORTHINESS DIRECTIVE For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.001(1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.
Boeing 727 Series Aeroplanes AD/B727/206 Forward Entry Door Hinge Cutouts 8/2007
Applicability: All Model 727, 727C, 727-100, -100C, -200, and -200F series aircraft. Requirement: Action in accordance with the technical requirements of FAA AD 2007-12-14 Amdt 39-15092.
Note: Boeing Service Bulletin 727-53A0198 Revision 3, or later FAA approved revision, refers. Compliance: As specified in the Requirement document, with a revised effective date of 2 August 2007. This Airworthiness Directive becomes effective on 2 August 2007. Background: The FAA received reports of skin and bear strap cracks at hinge cutouts of the forward entry door. Unless detected and corrected, such cracks could result in rapid decompression of the aircraft.
David Villiers Delegate of the Civil Aviation Safety Authority
19 June 2007
We try to embed the page this law was scraped from. If the site blocks framing, you still get the link and a local excerpt.
Last checked with source on —
Checking whether the official page can be embedded…
Plain-English simplify of this law: a short summary, key points, and both sides of the argument. Generated on first view via Replicate, then cached. Vote on what helps your study.
No study brief is cached for this law yet. Sign up to generate a plain-English brief.
Sign up to generate