Federal Register of Legislation
AIRWORTHINESS DIRECTIVE For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.001(1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.
Bell Helicopter Textron Canada (BHTC) 222 Series Helicopters AD/BELL 222/41 Main Rotor Grips and 9/2007 Flapping Bearing Assemblies
Applicability: All Model 230 helicopters. Requirement: Action in accordance with Transport Canada AD CF-98-17. Compliance: Unless already accomplished, within 10 flight hours after 30 August 2007. This Airworthiness Directive becomes effective on 30 August 2007. Background: Fatigue cracks were reported at the bolt holes of the main rotor pitch horn and in the flapping bearing assembly. This Directive requires certain actions to ensure proper torque on the retaining bolts of the main rotor grips and flapping bearing assemblies.
David Villiers Delegate of the Civil Aviation Safety Authority
11 July 2007
We try to embed the page this law was scraped from. If the site blocks framing, you still get the link and a local excerpt.
Last checked with source on —
Checking whether the official page can be embedded…
Plain-English simplify of this law: a short summary, key points, and both sides of the argument. Generated on first view via Replicate, then cached. Vote on what helps your study.
No study brief is cached for this law yet. Sign up to generate a plain-English brief.
Sign up to generate