AD/HU 369/119 - Tail Rotor Blade Root Fitting - 2 (Cth)

AIRWORTHINESS DIRECTIVE For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.001(1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

McDonnell Douglas (Hughes) and Kawasaki 369 Series Helicopters AD/HU 369/119 Tail Rotor Blade Root Fitting - 2 1/2008 DM

Applicability: Kawasaki Model 369HS and 369D helicopters, equipped with a tail rotor blade part number 369A1613, all dash numbers.

Requirement: Inspect each affected tail rotor blade for a smooth radius as follows:

a. Remove the tail rotor blade assembly in accordance with paragraphs 9.(1) through 9.(3), of Kawasaki Service Bulletins No. KSB-369-339 or KSB-369D-235, both dated 7 May 2007, as applicable; or later JCAB approved revision.

b. Using a bright light, inspect the bore of the tail rotor blade root fitting in accordance with paragraph 9.(4) and Figure 2 of the applicable service bulletin.

c. Before further flight, replace each blade assembly that does not have a smooth radius in accordance with paragraph 9.(4) b. of the applicable service bulletin.

d. Identify the serviceable tail rotor blade assembly with the applicable model of helicopter in accordance with paragraph 9.(5) and Figure 3 of the applicable service bulletin.