AD/B767/232 - Fuel Pump Housing to Wing Structure Electrical Bonding (Cth)

AIRWORTHINESS DIRECTIVE For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.001(1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

Boeing 767 Series Aeroplanes AD/B767/232 Fuel Pump Housing to Wing 13/2007 Structure Electrical Bonding

Applicability: Model 767-200, -300, -300F, and -400ER series aircraft. Requirement: Action in accordance with the technical requirements of FAA AD 2007-21-13 Amdt 39-15231.

Note: Boeing Service Bulletins 767-57-0092 original issue and Revision 1, and 767-57-0093 original issue and Revision 1, or later FAA approved revisions, refer. Compliance: As specified in the Requirement document, with a revised effective date of 20 December 2007. This Airworthiness Directive becomes effective on 20 December 2007. Background: The FAA requires reworking the electrical bonding between the aircraft structure and the pump housing of certain fuel boost pumps, and also requires related investigative actions and corrective actions if necessary. Insufficient electrical bonding could result in potential ignition sources inside the fuel tanks, which, in combination with flammable fuel vapours, could result in a fuel tank explosion and consequent loss of the aircraft.