AD/ROBIN/27 Amdt 2 - Rudder Pedal Bars (Cth)

AIRWORTHINESS DIRECTIVE On the effective date specified below, and for the reasons set out in the background section, the CASA delegate whose signature appears below revokes Airworthiness Directive (AD) AD/ROBIN/27 Amdt 1 and issues the following AD under subregulation 39.001(1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

Robin Aviation Series Aeroplanes AD/ROBIN/27 Amdt 2 Rudder Pedal Bars 1/2008

Applicability: Model R 2100, R 2100 A, R 2112, R 2120 U, R 2160, R 2160 D, and R 2160 I aircraft, serial numbers 1 through 378; and aircraft not fitted with reinforced rudder bars part number (P/N) 27.40.31.010 and P/N 27.40.31.020.

Model HR 200/100, HR 200/100S, HR 200/120, HR 200/120B, and HR 200/160 aircraft, serial numbers 1 through 378, and aircraft not fitted with reinforced rudder bars part number P/N 27.40.31.010 and P/N 27.40.31.020.

Note 1: This Directive is not applicable if reinforced rudder bars are already installed in accordance with a previous issue of this Directive.

Note 2: This Directive is not applicable to the R 2000 series aircraft manufactured by Alpha Aviation. These aircraft are fitted with reinforced rudder bars at manufacture. Requirement: 1. For Model R 2000 series aircraft, replace the left rudder bar P/N 27.23.05.010 and the right rudder bar P/N 27.23.05.020 with reinforced rudder bars part number P/N 27.40.31.010 and P/N 27.40.31.020 respectively, in accordance with Alpha Aviation Service Bulletin AA-SB27-003.