Vehicle Standard (Australian Design Rule 80/02 – Emission Control for Heavy Vehicles) 2006 (Cth)

Vehicle Standard (Australian Design Rule 80/02 — Emission Control for Heavy Vehicles) 2006

Compilation: 1 (up to and including Amendment 11)

Compilation Date: 20/12/2007

Compiled by: Vehicle Safety Standards, Department of Infrastructure, Transport, Regional Development and Local Government

CONTENTS

0.1 NAME OF STANDARD

0.2 COMMENCEMENT

1 SCOPE

2 APPLICABILITY AND IMPLEMENTATION

3 DEFINITIONS

4 REQUIREMENTS

5 EXEMPTIONS AND ALTERNATIVE PROCEDURES

6 ALTERNATIVE STANDARDS

NOTES---------------------------------------------------------------

0.1 NAME OF STANDARD

0.1.1 This Standard is the Vehicle Standard (Australian Design Rule 80/02 – Emission Control for Heavy Vehicles) 2006.

0.1.2 This Standard may also be cited as ADR 80/02.

0.2 COMMENCEMENT

0.2.1 This Standard commences on 20 December 2007.

1 SCOPE

1.1 This vehicle standard prescribes the exhaust emissions requirements for engines used in heavy vehicles in order to reduce air pollution.

2 APPLICABILITY AND IMPLEMENTATION

2.1 This vehicle standard applies to vehicles of the M and N categories, with a GVM greater than 3.5 tonnes, as provided in clause 2.2.

2.2 This vehicle standard applies:

2.2.1 from 1 January 2007 in relation to new model vehicles produced on or after 1 January 2007; and

2.2.2 from 29 February 2008 in relation to vehicles produced on or after 29 February 2008, other than new model vehicles referred to in clause 2.2.1.

2.3 For the purposes of clause 2.2.1, a new model vehicle is a vehicle of a model first produced with a date of manufacture on or after 1 January 2007.

2.4 To the extent of any inconsistency, the applicability dates specified in clause 2.2 apply in lieu of any dates specified in Appendix A, Appendix B or Appendix C.

2.5 Vehicles complying with ADR 80/03 need not comply with this vehicle standard.