Federal Register of Legislation
AIRWORTHINESS DIRECTIVE For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.001(1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.
Bombardier (Canadair) CL-600 (Challenger) Series Aeroplanes AD/CL-600/91 Fuel System Safety 3/2008 DM
Applicability: Model CL-600-2B19 aircraft, all serial numbers. Requirement: 1. Revise the approved maintenance schedule by incorporating the following inspection requirements as contained in Revision 7 of Canadair Regional Jet Model CL-600-2B19 Maintenance Requirements Manual, CSP A-053, Part 2, Appendix D, "Fuel System Limitations": Task Number Task Description 28-11-00-601 Detailed Inspection of the critical bonding jumpers for corrosion and damage 28-11-00-602 Function Check of the critical bonding jumpers 28-11-00-603 Detailed Inspection of the sealant on the in-tank LRUs 28-11-00-604 Detailed Inspection of the fuel tank wiring harness clipping along the front and rear spar of the centre and wing fuel tanks for condition and security 2. For aircraft with more than 15 000 hours total time in service (TIS) on the effective date of this Directive, carry out the initial inspection of the tasks detailed in Requirement 1. 3. Revise the approved maintenance schedule by incorporating the following inspection and maintenance requirements as contained in Revision 7 of Canadair Regional Jet Model CL-600-2B19 Maintenance Requirements Manual, CSP A-053, Part 2, Appendix D, "Fuel System Limitations": Task Number Task Description 29-33-01-601 Function Check of the hydraulic system No. 1, No. 2 and No. 3 reservoir temperature transducer 29-33-01-602 Discard of the hydraulic system No. 1, No. 2 and No. 3 reservoir temperature transducer
We try to embed the page this law was scraped from. If the site blocks framing, you still get the link and a local excerpt.
Last checked with source on —
Checking whether the official page can be embedded…
Plain-English simplify of this law: a short summary, key points, and both sides of the argument. Generated on first view via Replicate, then cached. Vote on what helps your study.
No study brief is cached for this law yet. Sign up to generate a plain-English brief.
Sign up to generate