AD/PW300/1 Amdt 1 - Engine High Pressure Compressor Drum (Cth)

AIRWORTHINESS DIRECTIVE On the effective date specified below, and for the reasons set out in the background section, the CASA delegate whose signature appears below revokes Airworthiness Directive (AD) AD/PW300/1 and issues the following AD under subregulation 39.001(1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

Pratt and Whitney Canada Turbine Engines - PW300 Series AD/PW300/1 Amdt 1 Engine High Pressure Compressor Drum 4/2008

Applicability: All post-Service Bulletin (SB) 24287, Pratt and Whitney Canada PW305A and PW305B Engines without SB PW300-72-24376 incorporated. Requirement: On all PW305A and PW305B engines with post SB PW300-72-24462 HPC drum rotor assemblies P/Ns 30B2478 and 30B2542, accomplish the following:

1.a. Gain access to inside of affected HPC rotor assembly and inspect (boroscope) its interior for cracks in accordance with the PW305 MM 05-20-00 "Periodic Inspections, Boroscope" requirements.

1.b. If a crack is found, remove the engine for HPC drum rotor replacement.

Inspection of affected HPC drum rotor assembly per SB PW300-72-24462 and/or PW305 MM 05-20-00 requirements prior to the effective date of this directive satisfy the actions detailed in Requirement 1 of this AD.

2. Repeat the boroscope inspection per Requirement 1.a of this AD.

2.b. If a crack is found, remove the engine for HPC rotor drum replacement.