AD/ROBIN/28 Amdt 2 - Wing Attachment Bolts (Cth)

AIRWORTHINESS DIRECTIVE On the effective date specified below, and for the reasons set out in the background section, the CASA delegate whose signature appears below revokes Airworthiness Directive (AD) AD/ROBIN/28 Amdt 1 and issues the following AD under subregulation 39.001(1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

Robin Aviation Series Aeroplanes AD/ROBIN/28 Amdt 2 Wing Attachment Bolts 6/2008

Applicability: Model HR 200/100, HR 200/100S, HR 200/120, HR 200/120B, and HR 200/160 aircraft, serial numbers 001 through 378.

Model R 2100, R 2100 A, R 2112, R 2120 U, and R 2160 D aircraft, serial numbers 001 through 378.

Model R 2160 aircraft, serial numbers 001 through 378, and serial number 160A-06001 and subsequent.

Model R 2160i aircraft, serial numbers 001 through 378, and serial numbers 160Ai-07007 and subsequent. Requirement: 1. For Model HR 200 aircraft, check the torque of the front, main, and rear wing attachment bolts, in accordance with Avions Pierre Robin Service Bulletin (SB) No. 145 Revision 2.

If the torque values are not as specified in SB No. 145 Revision 2, before further flight, contact the aircraft manufacturer for corrective action.

If the torque values are correct, the previous flight limitation +3.8g and -1.52g in the "N" category is cancelled.