AD/ROBIN/32 Amdt 2 - Wing Spars (Cth)

AIRWORTHINESS DIRECTIVE On the effective date specified below, and for the reasons set out in the background section, the CASA delegate whose signature appears below revokes Airworthiness Directive (AD) AD/ROBIN/32 Amdt 1 and issues the following AD under subregulation 39.001(1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

Robin Aviation Series Aeroplanes AD/ROBIN/32 Amdt 2 Wing Spars 6/2008

Applicability: All Model HR 100 series aircraft.

Model HR200/100, HR200/100S, HR200/120, HR200/120B, and HR200/160 aircraft, serial numbers 001 through 378.

Model R2100, R2100A, R2112, R2120U, and R2160D aircraft, serial numbers 001 through 378.

Model R2160 aircraft, serial numbers 001 through 378, and serial number 160A-06001 and subsequent.

Model R2160i aircraft, serial numbers 001 through 378, and serial numbers 160Ai-07007 and subsequent. Requirement: Remove the main landing gear legs and all the wing inspection panels in accordance with the instructions in the aircraft maintenance manual, and inspect the visible parts of the spar web and the upper and lower boom angles (top and bottom spar caps), in accordance with Avions Pierre Robin Service Letter (SL) No. 19 and Service Bulletin (SB) No. 99.

If corrosion is found on the rear face of the spar web or the upper and lower boom angles, then inspect the front face of the spar for corrosion in accordance with SL No. 19 and SB No. 99. It may be necessary to cut inspection holes or remove the wings to inspect the front face of the spar. Inspection holes must be prepared to an approved repair scheme.