AD/PA-24/32 Amdt 2 - Stabilator Attachment Bolts - Inspection (Cth)

AIRWORTHINESS DIRECTIVE On the effective date specified below, and for the reasons set out in the background section, the CASA delegate whose signature appears below revokes Airworthiness Directive (AD) AD/PA-24/32 Amdt 1 and issues the following AD under subregulation 39.001(1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

Piper PA-24 (Comanche) Series Aeroplanes AD/PA-24/32 Amdt 2 Stabilator Attachment Bolts - Inspection 11/2008

Applicability: All models Piper PA-24, PA-24-250 and PA-24-260 with serial numbers from 24-1 to 24-5047; and PA-24-400 with serial numbers from 26-2 to 26-148 if the four stabilator attachment bolts are not made of corrosion-resistant steel. Requirement: Remove the four stabilator attachment bolts and inspect for corrosion in accordance with Piper SL No. 667A.

If corrosion is found, before further flight replace the bolt, nut and washer with unused parts of the same part numbers or equivalent. Alternatively, the bolts can be replaced by equivalent corrosion-resistant AN bolts.

Note 1: Parts numbered 502329 and 502342 are corrosion-resistant bolts.

Note 2: FAA AD 74-13-03 refers. Compliance: 1. If the four stabilator attachment bolts have not previously been inspected for corrosion in accordance with this AD, Piper SL No. 667A, or FAA AD 74-13-03, before further flight after 31 October 2008.