Federal Register of Legislation
AIRWORTHINESS DIRECTIVE For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.001(1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.
Embraer ERJ-170 Series Aeroplanes AD/ERJ-170/20 Engine Pylon Bulkhead 1 Fasteners 13/2008
Applicability: Model ERJ 170 aircraft, serial numbers 17000156 through 17000169. Requirement: Action in accordance with the requirements of ANAC AD 2008-10-04 Amdt 39-1247.
Note: Embraer Service Bulletin No. 170-54-0007 original issue, or later ANAC approved revision, refers. Compliance: As specified in the Requirement document, with a revised effective date of 18 December 2008. This Airworthiness Directive becomes effective on 18 December 2008. Background: The manufacturer has determined that some aluminium fasteners may have been installed instead of titanium fasteners, at bulkhead 1 of the left and right engine pylons of some Model ERJ 170 aircraft.
David Villiers Delegate of the Civil Aviation Safety Authority
5 November 2008
We try to embed the page this law was scraped from. If the site blocks framing, you still get the link and a local excerpt.
Last checked with source on —
Checking whether the official page can be embedded…
Plain-English simplify of this law: a short summary, key points, and both sides of the argument. Generated on first view via Replicate, then cached. Vote on what helps your study.
No study brief is cached for this law yet. Sign up to generate a plain-English brief.
Sign up to generate