AD/A320/228 - Electronic Instrument System Display Management Computer Software Update (Cth)

AIRWORTHINESS DIRECTIVE For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.001(1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

Airbus Industrie A319, A320 and A321 Series Aeroplanes AD/A320/228 Electronic Instrument System Display Management Computer Software Update 13/2008

Applicability: Airbus aircraft listed in Table 1, all manufacturer serial numbers (MSN), if equipped with Electronic Instrument System EIS1 standard V32 [Display Management computer (DMC) Part Number (P/N) 9615325032], EIS1 standard V40 [DMC P/N 9615325040], or EIS1 standard V50 [DMC P/N 9615325050]. Table 1 A319-111 A319-131 A320-212 A320-232 A321-211 A319-112 A319-132 A320-214 A320-233 A321-212 A319-113 A319-133 A320-215 A321-111 A321-213 A319-114 A320-111 A320-216 A321-112 A321-231 A319-115 A320-211 A320-231 A321-131 A321-232 Requirement: 1. Modify the aircraft by installing EIS1 software standard V60 (DMC P/N 9615325060) in accordance with the instructions of Airbus SB A320-31-1286 dated 22 January 2008 or later revision approved by the European Aviation Safety Agency (EASA). 2. EIS1 software standard V32 (DMC P/N 9615325032), EIS1 software standard V40 (DMC P/N 9615325040) or EIS1 software standard V50 (DMC P/N 9615325050) may not be installed on any aeroplane that has been modified in accordance with Requirement 1. Note: EASA AD 2008-0198 refers. Compliance: For Requirement 1 - Not later than 30 November 2013. For Requirement 2 - After modification of an aircraft in accordance with Requirement 1. This Airworthiness Directive becomes effective on 18 December 2008. Background: Two incidents have occurred on Airbus A320 family aircraft during an Airborne Collision Avoidance System (ACAS)/Traffic Alert and Collision Avoidance System (TCAS) Resolution Advisory (RA). One of the Human-Machine Interface (HMI) factors was the lack of visibility of relevant information on the Primary Flight Display (PFD).