AD/A330/102 - Door 2 Hat Rack Electrical Connectors (Cth)

AIRWORTHINESS DIRECTIVE For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.001(1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

Airbus Industrie A330 Series Aeroplanes AD/A330/102 Door 2 Hat Rack Electrical Connectors 6/2009

Applicability: A330-201, A330-202, A330-203, A330-223, A330-243, A330-301, A330-302, A330-303, A330-321, A330-322, A330-323, A330-341, A330-342 and A330-343 model aeroplanes, all manufacturer serial numbers (MSN) on which Airbus modification 48825 has been embodied during production, except those on which Airbus modification 57409 has been embodied during production. Requirement: 1. Modify both Left-Hand (LH) and Right-Hand (RH) hat-rack connectors in accordance with Airbus Service Bulletin (SB) A330-92-3070 Revision 01 dated 12 January 2009 or later revisions approved by the European Aviation Safety Agency (EASA). 2. For aeroplanes already modified prior to the effective date of this Directive in accordance with SB A330-92-3070 original issue, accomplish the additional work in accordance with SB A330-92-3070 Revision 01 or later revisions approved by the EASA. Note: EASA AD 2009-0077 refers. Compliance: For Requirements 1 and 2 - Within 24 months after the effective date of this Directive. This Airworthiness Directive becomes effective on 4 June 2009. Background: The EASA has advised that in the door 2 area, the hat-racks are supplied with a basic wire harness which includes "Oxygen Masks" activation. In monument installations, the respective non-used hat-rack connections between monument and outer skin are stowed.