AD/ROBIN/40 Amdt 1 - Nose Landing Gear Bracket (Cth)

AIRWORTHINESS DIRECTIVE On the effective date specified below, and for the reasons set out in the background section, the CASA delegate whose signature appears below revokes Airworthiness Directive (AD) AD/ROBIN/40 and issues the following AD under subregulation 39.001(1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

Robin Aviation Series Aeroplanes AD/ROBIN/40 Amdt 1 Nose Landing Gear Bracket 23/2010

Applicability: Model R 2100, R 2100 A, R 2112, R 2120 U, and R 2160 D aircraft, serial numbers 001 through 378.

Model R 2160 aircraft, serial numbers 001 through 378, and serial numbers 160A-06001 and subsequent.

Model R 2160i aircraft, serial numbers 001 through 378, and serial numbers 160Ai-07007 and subsequent. Requirement: Action in accordance with Avions Pierre Robin Service Bulletin (SB) No. 101 Revision 3.

Note: NZ CAA AD DCA/R2000/15A refers. Compliance: Compliance times remain unchanged from 17 January 2008.

For support plates with a width of less than 84mm:

Within 100 hours time in service after 17 January 2008, unless already accomplished within the last 100 hours time in service. If no cracking is detected, inspect thereafter at intervals not to exceed 100 hours time in service.

If cracks are detected, determine the crack dimensions in accordance with SB No. 101 Revision 3.