Vehicle Standard (Australian Design Rule 79/02 — Emission Control for Light Vehicles) 2005 (Cth)

Vehicle Standard (Australian Design Rule 79/02 — Emission Control for Light Vehicles) 2005

as amended

made under section 7(1) of the

Motor Vehicle Standards Act 1989

This compilation was prepared on 5 October 2011 taking into account amendments up to Vehicle Standard (Australian Design Rule 79/02 — Emission Control for Light Vehicles) 2005 Amendment 3

Volume 1 contains Clauses 0.1–6 and the Notes, and Volume 2 contains Appendix A

Prepared by the Office of Legislative Drafting and Publishing, Attorney-General's Department, Canberra.

CONTENTS

0.1 NAME OF STANDARD [see Note 1]

0.1.1 This Standard is the Vehicle Standard (Australian Design Rule 79/02 — Emission Control for Light Vehicles) 2005.

0.1.2 This Standard may also be cited as ADR 79/02.

0.2 COMMENCEMENT [see Note 1]

0.2.1 This Standard commences on the day after it is registered.

0.3 REPEAL

0.3.1 This Standard repeals each vehicle standard with the name ADR 79/02, and each amendment of such a standard, that is: (a) made under section 7 of the Motor Vehicles Standard Act 1989; and (b) in force at the commencement of this Standard.

0.3.2 This Standard also repeals each instrument made under section 7 of the Motor Vehicles Standard Act 1989 that creates or amends a vehicle standard with the name ADR 79/02, if there are no other vehicle standards created by that instrument that are still in force at the commencement of this Standard.

1 SCOPE

1.1 This vehicle standard prescribes the exhaust and evaporative emissions requirements for light vehicles in order to reduce air pollution.

2 APPLICABILITY AND IMPLEMENTATION

2.1 This vehicle standard is applicable to all M and N category vehicles with a GVM less than or equal to 3.5 tonnes, in accordance with the requirements of clause 1.1 of Appendix A and as provided in clause 2.2.