Vehicle Standard (Australian Design Rule 69/00 – Full Frontal Impact Occupant Protection) 2006 (Cth)

Vehicle Standard (Australian Design Rule 69/00 – Full Frontal Impact Occupant Protection) 2006 Compilation 2

Compilation: 2 (up to and including Vehicle Standard (Australian Design Rule 69/00 – Full Frontal Impact Occupant Protection) 2006 Amendment 2)

Compilation Date: 02 March 2012

Compiled by: Vehicle Safety Standards, Department of Transport and Regional Services

Enabling Legislation: Section 7 Motor Vehicle Standards Act 1989

CONTENTS

1. legislative provisions..............................................

1.1 NAME OF STANDARD...........................................

1.2 COMMENCEMENT..............................................

1.3 REPEAL.......................................................

2. SCOPE.........................................................

3. APPLICABILITY AND IMPLIMENTATION..........................

4. DEFINITIONS...................................................

5. REQUIREMENTS................................................

6. TEST VEHICLE CONDITION......................................

7. SET UP REQUIREMENTS FOR HYBRID III TEST DUMMY............

8. POSITIONING PROCEDURES FOR HYBRID III TEST DUMMY........

9. SET UP REQUIREMENTS FOR HYBRID II TEST DUMMY.............

10. POSITIONING PROCEDURES FOR HYBRID II TEST DUMMY........

11. Chalk Transfer Method For Determining Head Contact....................

12. ALTERNATIVE STANDARDS

Compilation NOTES.....................................................

1. legislative provisions

1.1 NAME OF STANDARD

1.1.1 This Standard is the Vehicle Standard (Australian Design Rule 69/00 – Full Frontal Impact Occupant Protection) 2006.

1.1.2 This Standard may also be cited as Australian Design Rule 69/00 — Full Frontal Impact Occupant Protection.

1.2 COMMENCEMENT