Greenhouse and Energy Minimum Standards (Power Transformers) Determination 2012 (Cth)

Greenhouse and Energy Minimum Standards (Power Transformers) Determination 20121 Greenhouse and Energy Minimum Standards Act 2012

I, MARK DREYFUS, Parliamentary Secretary for Climate Change and Energy Efficiency, make this Determination under section 23 of the Greenhouse and Energy Minimum Standards Act 2012.

Dated 25 October 2012

MARK DREYFUS

Parliamentary Secretary for Climate Change and Energy Efficiency

COPYRIGHT

© 2012 Commonwealth of Australia

This Determination includes material from Australian Standards and/or Australian/New Zealand Standards, which are copyright Standards Australia Ltd. Apart from reproduction for personal and non-commercial use, and uses permitted under the Copyright Act 1968, Standards Australia Ltd material may not be reproduced without permission or licence.

With the exception of the Commonwealth Coat of Arms, Commonwealth copyright material is licensed under the Creative Commons Attribution-Non-Commercial-ShareAlike 3.0 Australia Licence. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/3.0/.

You are free to copy, communicate and adapt the Commonwealth copyright material, so long as you attribute the Commonwealth of Australia.

Complete Australian/New Zealand Standards are available for purchase from Standards Australia Ltd. Requests and inquiries concerning other reproduction and rights pertaining to standards should be directed to SAI Global Limited.

1 Name of Determination This Determination is the Greenhouse and Energy Minimum Standards (Power Transformers) Determination 2012. 2 Commencement This Determination comes into force on the day after it is registered. 3 Definitions In this Determination: Act means the Greenhouse and Energy Minimum Standards Act 2012. AS 2374.1-1997 means Australian Standard AS 2374.1-1997 Power transformers. Part 1: General, as it existed on 5 September 1997. Note: AS 2374.1-1997 is available from Standards Australia Limited as a superseded standard. AS 2374.1.2-2003 means Australian Standard AS 2374.1.2-2003 Power transformers. Part 1.2: Minimum energy performance standard (MEPS) requirements for distribution transformers, as it existed on the date this Determination came into force. Note 1: AS 2374.1.2-2003 is available from Standards Australia Limited. Note 2: AS 2374.1.2-2003 includes all amendments up to and including AS 2374.1.2-2003 /Amdt:1 made on 19 August 2005. AS 2735-1984 means Australian Standard AS 2735-1984 Dry-type power transformers, as it existed on 9 November 1984. Note: AS 2735-1984 is available from Standards Australia Limited as a superseded standard. Australian Standard means a standard that is published by Standards Australia Limited denoted by the letters "AS" and identifying numbers and/or letters. Australian/New Zealand Standard means a standard that is jointly published by Standards Australia Limited and Standards New Zealand, is applicable in both countries and denoted by the letters "AS/NZS" and identifying numbers and/or letters. CIE Standard means a standard that is published by, or on behalf of, the International Commission on Illumination. IEC Standard means a standard with letters "IEC" and a number that is published by, or on behalf of, the International Electrotechnical Commission. power transformer means a static piece of apparatus with two or more windings which, by electromagnetic induction, transforms a system of alternating voltage and current into another system of voltage and current usually of different values and at the same frequency for the purpose of transmitting electrical power. Note: This is the same meaning as in subclause 3.1.1 of AS 2374.1-1997. standard means an Australian Standard, an Australian/New Zealand Standard, a CIE Standard, an IEC Standard or any other equivalent document.