Vehicle Standard (Australian Design Rule 96/00 –Commercial Vehicle Tyres) 2018 (Cth)

Vehicle Standard (Australian Design Rule 96/00 – Commercial Vehicle Tyres) 2018 I, ANDREW BROAD, Assistant Minister to the Deputy Prime Minister, determine this vehicle standard under section 7 of the Motor Vehicle Standards Act 1989.

Dated 25 October 2018

[SIGNED]

Andrew Broad

Assistant Minister to the Deputy Prime Minister

CONTENTS

1. legislative provisions...........................................3 2. FUNCTION..................................................3 3. APPLICABILITY.............................................3 4. DEFINITIONS...............................................3 5. requirements.................................................3 6. exemptions AND ALTERNATIVE PROCEDURES..................4 7. alternative standardS...........................................5 APPENDIX A.........................................................6

1. legislative provisions 1. Name of Standard 1. This Standard is the Vehicle Standard (Australian Design Rule 96/00 –Commercial Vehicle Tyres) 2018. 2. This Standard may also be cited as Australian Design Rule 96/00 – Commercial Vehicle Tyres. 2. Commencement 1. This Standard commences on the day after it is registered.

2. FUNCTION 1. The function of this vehicle standard is to specify requirements for new pneumatic tyres designed primarily for commercial vehicles.

3. APPLICABILITY 1. The circumstances under which vehicles must comply with this standard are set out in the Australian Design Rule 95/… – Installation of Tyres. 2. This standard does not apply to passenger car tyres (otherwise known as Class C1 tyres; and designed primarily for vehicles of UN categories M1, N1, O1 and O2). 3. This standard does not apply to re-treaded tyres fitted to trailers. 4. This standard does not apply to any temporary-use spare unit(s) supplied with a vehicle.