AD/CESSNA 208/18 Amdt 1 Emergency Power Lever Shear Wire (Cth)

AIRWORTHINESS DIRECTIVE On the commencement date specified below, and for the reasons set out in the background section, the CASA delegate whose signature appears below repeals Airworthiness Directive (AD) AD/CESSNA 208/18 and issues the following AD under subregulation 39.001 (1) of CASR and subsection 33 (3) of the Acts Interpretation Act 1901. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct an unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

Textron Aviation (Cessna) 208 Series Aeroplanes AD/CESSNA 208/18 Amdt 1 Emergency Power Lever Shear Wire 3/2019

Applicability: Textron Aviation (Cessna) 208 and 208B model aircraft approved for operation under regulation 174B(2)(d) or regulation 175A(1)(d) of the Civil Aviation Regulations 1988, ("an Approved Single Engine Turbine Powered Aircraft (ASETPA) approval"), and within the following serial number ranges: Model Serial Numbers Cessna 208 20800001 through to 20800350 Cessna 208B 208B0001 through to 208B0919 Requirement: Install a frangible/shear wire that ties the Emergency Power Lever (EPL) to the pedestal cover in accordance with Cessna Service Bulletin (SB) CAB01-15 as in force at the commencement of this AD. Note 1: The aircraft maintenance manual details actions to be followed when the frangible/shear wire is found broken. Compliance: Unless previously accomplished, within 6 months from the effective date of this Directive. Note 2: Compliance with AD/CESSNA 208/18 constitutes compliance with this AD. This AD commences on 8 February 2019. Background: Following an incident involving the use of the EPL, the Australian Transport Safety Bureau recommended the fitment of frangible/shear wire between the pedestal and the EPL. This will help ensure appropriate maintenance actions when the EPL has been used for any reason.