Fuel Quality Standards (Autogas) Determination 2019 (Cth)

Fuel Quality Standards (Autogas) Determination 2019

I, Angus Taylor, Minister for Energy and Emissions Reduction, make the following determination.

Dated 18 September 2019

Angus Taylor Minister for Energy and Emissions Reductions

Contents 1 Name 2 Commencement 3 Authority 4 Definitions 5 Fuel standard for autogas

1 Name This instrument is the Fuel Quality Standards (Autogas) Determination 2019.

2 Commencement This instrument commences on 1 October 2019.

3 Authority This instrument is made under section 21 of the Fuel Quality Standards Act 2000.

4 Definitions Note: A number of expressions used in this instrument are defined in section 4 of the Act, including the following: (a) fuel (b) supply (c) inspector In this instrument: Act means the Fuel Quality Standards Act 2000. Autogas means liquefied petroleum gas that is supplied or represented as fuel suitable for motor vehicles but excludes liquefied petroleum gas supplied in cylinders. ASTM followed by an alphanumeric code means the testing method developed under that code by the standards development organisation called ASTM International. EN followed by a numeric code means the testing method developed under that code by the European Committee for Standardization. EN ISO followed by a numeric code means the testing method developed under that code by the European Committee for Standardization. ISO followed by a numeric code means the testing method developed under that code by the International Organization for Standardization. JLPGA followed by an alphanumeric code means the testing method developed under that code by the Japan LP Gas Association. mg/kg means milligrams per kilogram, and is equivalent to 'parts per million' or 'ppm' by mass.

5 Fuel standard for autogas (1) In relation to a parameter mentioned in an item of the following table, autogas must comply with the specification for that parameter mentioned in that item.