Vehicle Standard (Australian Design Rule 30/01 – Smoke Emission Control for Diesel Vehicles) 2006 (Cth)

Vehicle Standard (Australian Design Rule 30/01 — Smoke Emission Control for Diesel Vehicles) 2006 made under Section 12 of the Road Vehicle Standards Act 2018

Compilation: 1 (up to and including Vehicle Standard (Australian Design Rule) Amendment Instrument 2021 (No.2))

Compilation Date: 30/11/2021

Volume 1 contains Clauses 0.1-6 and the Notes Volume 2 contains Appendix A

Compiled by: Vehicle Safety Policy and Partnerships, Department of Infrastructure, Transport, Regional Development and Communications Contents 0.1 NAME OF STANDARD 0.2 COMMENCEMENT 1 SCOPE 2 APPLICABILITY AND IMPLEMENTATION 3 DEFINITIONS 4 REQUIREMENTS 5 EXEMPTIONS AND ALTERNATIVE PROCEDURES 6 ALTERNATIVE STANDARDS NOTES APPENDIX A.....................................................VOLUME 2

0.1 NAME OF STANDARD

0.1.1 This Standard is the Vehicle Standard (Australian Design Rule 30/01 – Smoke Emission Control for Diesel Vehicles) 2006.

0.1.2 This Standard may also be cited as ADR 30/01.

0.2 COMMENCEMENT

0.2.1 This Standard commences on the day after it is registered.

1 SCOPE

1.1 This vehicle standard prescribes the smoke emission requirements for diesel fuelled vehicles in order to reduce air pollution.

2 APPLICABILITY AND IMPLEMENTATION

2.1 This vehicle standard applies to all M and N category vehicles with an engine that operates on diesel as provided in clause 2.2.

2.2 This vehicle standard applies:

2.2.1 from 1 January 2002 in relation to new model vehicles produced on or after 1 January 2002; and

2.2.2 from 1 January 2003 in relation to all vehicles produced on or after 1 January 2003, other than new model vehicles specified in clause 2.2.1.

2.3 For the purpose of clause 2.2.1, a "new model vehicle" is a vehicle of a model first produced with a date of manufacture on or after 1 January 2002.