AD/PA-32/42 Amdt 3 Wing Structural Fatigue Life Limitation (Cth)

AIRWORTHINESS DIRECTIVE On the commencement date specified below, and for the reasons set out in the background section, the CASA delegate whose signature appears below repeals Airworthiness Directive (AD) AD/PA-32/42 Amdt 2 and issues the following AD under subregulation 39.001 (1) of CASR and subsection 33 (3) of the Acts Interpretation Act 1901. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct an unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

Piper PA-32 (Cherokee Six) Series Aeroplanes AD/PA-32/42 Amdt 3 Wing Structural Fatigue Life Limitation 2/2022

Applicability: All Piper PA-32 series aircraft, all models. Requirement: 1. Retire from service: 1.1. The wing main spar assembly; and 1.2. The bottom cap of the wing main spar box (carry through). OR 2. Inspect the lower wing joint for fatigue cracks in accordance with an approved inspection program. Note 1: For Requirement 1, replace retired components in accordance with approved maintenance data; Regulations 42V and 2A of CAR refer. Note 2: For Requirement 2, an acceptable standard for the inspection program is FAR 23.572 (a) (3) Amdt 23-48 or later or an equivalent level of safety approved by CASA. Compliance: For models PA-32-260, PA-32-300, PA-32R-300, PA-32S-300, PA-32RT-300, PA‑32RT-300T: For Requirement 1: Retire before 11000 hours component time in service. For Requirement 2: Inspect before 11000 hours component time in service, and thereafter at the intervals specified in the approved inspection program. For models PA-32-301, PA-32R-301, PA-32-301T, PA-32R-301T, PA-32-301FT, PA-32-301XTC: For Requirement 1: Retire before 13700 hours component time in service. For Requirement 2: Inspect before 13700 hours component time in service, and thereafter at the intervals specified in the approved inspection program. Alternative Means Of Compliance or Exclusions approved for AD/PA-32/42 Amdt 2 are approved for AD/PA-32/42 Amdt 3. This AD commences on 27 January 2022.