Vehicle Standard (Australian Design Rule 50/00 – Front Fog Lamps) 2006 (Cth)

Vehicle Standard (Australian Design Rule 50/00 – Front Fog Lamps) 2006

Made under section 12 of the Road Vehicle Standards Act 2018

Compilation: 3 (up to and including Vehicle Standard (Australian Design Rule) Lighting Standards Amendment Instrument 2022 (No.1)

Compilation Date: 20 January 2023

Compiled by: Vehicle Safety Policy and Partnerships, Department of Infrastructure, Transport, Regional Development, Communications and the Arts

CONTENTS

0. legislative provisions 1. SCOPE 2. APPLICABILITY AND IMPLEMENTATION 3. DEFINITIONS 4. REQUIREMENTS 5. EXEMPTIONS AND ALTERNATIVE PROCEDURES 6. SUPPLEMENTARY GENERAL REQUIREMENTS 7. ALTERNATIVE STANDARDS 8. NOTES APPENDIX A COMPILATION NOTES

0. legislative provisions 0.1 NAME OF STANDARD 0.1.1 This Standard is the Vehicle Standard (Australian Design Rule 50/00 – Front Fog Lamps) 2006. 1. SCOPE This Australian Design Rule (ADR) prescribes the photometric requirements for front fog lamps. 2. APPLICABILITY AND IMPLEMENTATION 2.1. The circumstances under which front fog lamps are mandatory, optional, or prohibited are set out in either ADRs 13/…, 19/... or 67/... 3. DEFINITIONS 3.1. Refer to paragraph 1 of Appendix A. 4. REQUIREMENTS 4.1. Front fog lamps fitted to vehicles in accordance with ADRs 13/…, 19/… or 67/… and required to comply with ADR 50/00 must comply with either: a) The technical requirements of Appendix A as varied by part 5. Exemptions and Alternative Procedures and part 6. Supplementary General Requirements or b) The alternative standards set out in part 7. Alternative Standards. 5. EXEMPTIONS AND ALTERNATIVE PROCEDURES 5.1. The following provisions of Appendix A do not apply to this rule 5.1.1. Scope (including footnote 1) Section 2 Application for approval Section 3 Markings Section 4 Approval Section 8 Determination of discomfort (dazzle) Section 9 Modification of the type of front fog lamp and extension of approval Section 10 Conformity of production – partial (for particular deletions to the section refer to Clause 5.1.2) Section 11 Penalties for non-conformity of production Section 12 Production definitely discontinued Section 13 Names and addresses of Technical Services responsible for conducting approval tests, and of Type Approval Authorities Section 14 Transitional provisions Annexes Annex 1 Communication Annex 2 Tolerance requirements for conformity of production control procedure Annex 3 Examples of arrangements of approval marks for front fog lamps of class B and class F3 Annex 7 Minimum requirements for conformity of production control procedure Annex 8 Minimum requirements for sampling by an inspector