Federal Register of Legislation
Vehicle Standard (Australian Design Rule 80/03 — Emission Control for Heavy Vehicles) 2006 made under Section 12 of the Road Vehicle Standards Act 2018
Compilation: 4 (up to and including Vehicle Standard (Australian Design Rule 80/03 — Emission Control for Heavy Vehicles) 2006 Amendment 4)
Compilation Date: 18/02/2023
Volume 1 contains Clauses 0.1–6 and Notes Volume 2 contains Appendix A Volume 3 contains Appendix B Volume 4 contains Appendix C Volume 5 contains Appendix D
Compiled by: Department of Infrastructure, Transport, Regional Development, Communications and the Arts
CONTENTS 0.1 NAME OF STANDARD 1 SCOPE 2 APPLICABILITY AND IMPLEMENTATION 3 DEFINITIONS 4 REQUIREMENT 5 EXEMPTIONS AND ALTERNATIVE PROCEDURES 6 ALTERNATIVE STANDARDS NOTES
0.1 NAME OF STANDARD
0.1.1 This Standard is the Vehicle Standard (Australian Design Rule 80/03 – Emission Control for Heavy Vehicles) 2006.
0.1.2 This Standard may also be cited as ADR 80/03.
1 SCOPE 1.1 This vehicle standard prescribes the exhaust emissions requirements for engines used in heavy vehicles in order to reduce air pollution.
2 APPLICABILITY AND IMPLEMENTATION 2.1 This vehicle standard applies to vehicles of the M and N categories, with a GVM greater than 3.5 tonnes, as provided in clause 2.2.
2.2 This vehicle standard applies:
2.2.1 from 1 January 2010 in relation to new model vehicles produced on or after 1 January 2010; and
We try to embed the page this law was scraped from. If the site blocks framing, you still get the link and a local excerpt.
Last checked with source on —
Checking whether the official page can be embedded…
Plain-English simplify of this law: a short summary, key points, and both sides of the argument. Generated on first view via Replicate, then cached. Vote on what helps your study.
No study brief is cached for this law yet. Sign up to generate a plain-English brief.
Sign up to generate