Vehicle Standard (Australian Design Rule 111/00 – Advanced Emission Control for Light Vehicles) 2024 (Cth)

Vehicle Standard (Australian Design Rule 111/00 – Advanced Emission Control for Light Vehicles) 2024

I, CATHERINE KING, Minister for Infrastructure, Transport, Regional Development and Local Government, determine this national road vehicle standard under section 12 of the Road Vehicle Standards Act 2018.

Dated: 9 April 2024

[SIGNED]

Catherine King

Minister for Infrastructure, Transport, Regional Development and Local Government

Contents 1. LEGISLATIVE PROVISIONS 2. FUNCTION 3. APPLICABILITY 4. DEFINITIONS 5. REQUIREMENTS 6. EXEMPTIONS AND ALTERNATIVE PROCEDURES 7. ALTERNATIVE STANDARDS APPENDIX A

1. LEGISLATIVE PROVISIONS

1.1. Name of Standard

1.1.1. This standard is the Vehicle Standard (Australian Design Rule 111/00 – Advanced Emission Control for Light Vehicles) 2024.

1.1.2. This standard may also be cited as Australian Design Rule 111/00 – Advanced Emission Control for Light Vehicles, the Australian Design Rule 111/00, or ADR 111/00.

1.2. Commencement

1.2.1. This standard commences on the day after it is registered.

2. FUNCTION

2.1. The function of this vehicle standard is to specify performance based requirements for exhaust and evaporative emissions requirements for light vehicles to reduce air pollution and improved test procedures for the measurement of criteria emissions, emissions of carbon dioxide and fuel consumption, electric energy consumption and electric range.

3. APPLICABILITY

3.1. This vehicle standard applies to category MA, MB, MC, MD and NA vehicles with a gross vehicle mass not exceeding 3,500kg from the dates set out in clauses 3.1.1 to 3.1.2 and the table under clause 3.4 below.