Community Land Development Regulation 2021 (2021-600) (NSW)

Community Land Development Regulation 2021

Part 1 Preliminary

1 Name of Regulation This Regulation is the Community Land Development Regulation 2021.

2 Commencement This Regulation commences on 1 December 2021 and is required to be published on the NSW legislation website.

3 Definitions In this Regulation— access way plan means a plan for an open access way or private access way included in the management statement for a scheme under the Act, section 41(3). detailed survey information, for a plan, has the same meaning as in the Act, section 25. statutory easement diagram—see section 26(1). survey has the same meaning as in the Surveying and Spatial Information Act 2002. the Act means the Community Land Development Act 2021.

Note— The Act and the Interpretation Act 1987 also contain definitions and other provisions that affect the interpretation and application of this Regulation.

4 Application (1) This Regulation applies in addition to— (a) the Conveyancing (General) Regulation 2018, Part 3 and Schedule 1, or the equivalent provisions of a regulation that replaces that regulation, and (b) the regulations made under the Real Property Act 1900 and the lodgment rules. (2) This Regulation prevails to the extent of an inconsistency between this Regulation and the provisions referred to in subsection (1).

Part 2 Scheme plans

5 Location plans—the Act, Schedule 1, cl 1(2)(b) A location plan included in a scheme plan must— (a) be clearly labelled "LOCATION PLAN" in the plan drawing area, and (b) contain a schedule on which to record subsequent subdivisions, consolidations, severances and other changes to lots in the scheme.

6 Detail plans—the Act, Schedule 1, cl 1(2)(b) (1) Each sheet of a detail plan included in a scheme plan must be clearly labelled "DETAIL PLAN" in the plan drawing area. (2) The detail plan must set out the detailed survey information for all of the lots in the scheme, including the association property. (3) The association property must be numbered "Lot 1" and, if it comprises more than 1 part, each part must be identified as part of Lot 1. (4) All other lots on the detail plan must be numbered consecutively, beginning with "Lot 2".