AD/CESSNA 650/6 Amdt 1 - MLG Side Brace Assembly (Cth)

AIRWORTHINESS DIRECTIVE For the reasons set out in the background section, the CASA delegate whose signature appears below revokes Airworthiness Directive (AD) AD/CESSNA 650/6 and issues the following AD under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

Cessna 650 (Citation III) Series Aeroplanes

AD/CESSNA 650/6 Amdt 1

MLG Side Brace Assembly 13/2002

Applicability: Cessna Model 650 aeroplanes serial number -0001 through -0241 inclusive, and serial number -7001 through -7112 inclusive.

Requirement: 1. Carry out a one time inspection of the left hand and right hand side brace mechanism assemblies to determine part number for each assembly installed in accordance with Cessna Service bulletin SB650-32-47, including Cessna Service Bulletin Supplemental Data SB650-32-47.

2. If correct part number side brace mechanism assemblies are found as listed in Cessna Service Bulletin SB650-32-47, including Cessna Service Bulletin Supplemental Data SB650-32-47, no further action is required.

3. Replace any side brace mechanism assemblies found not to have the correct part number, in accordance with Cessna Service Bulletin SB650-32-47, including Cessna Service Bulletin Supplemental Data SB650-32-47.

Note: FAA AD 2002-14-24 Amdt 39-12824 refers.

Compliance: 1. Unless previously accomplished; within six months after 31 October 2002.