Federal Register of Legislation
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES
Grumman G21 (Goose) Series Aeroplanes
AD/G21/4 Rudder Control Push-Rod Assembly P/N 12727-1 - Inspection
10/77
Applicability: All models.
Requirement: 1. Remove rudder control push rod assembly P/N 12727-1.
2. Thoroughly clean both rod end fittings.
3. Inspect both fittings for cracks using a dye penetrant technique in conjunction with at least a 10X magnifying glass.
Note 1. Push rod assembly P/N 12727-1 is connected to the LH rudder pedals and is located below the pilot's compartment floor approximately 240 mm to the right of the aircraft centre line.
Note 2. FAA AD 63-27-2 Amendment 655 refers.
Compliance: Inspect initially before issue of Certificate of Airworthiness and thereafter at intervals not exceeding 100 hours time in service.
We try to embed the page this law was scraped from. If the site blocks framing, you still get the link and a local excerpt.
Last checked with source on —
Checking whether the official page can be embedded…
Plain-English simplify of this law: a short summary, key points, and both sides of the argument. Generated on first view via Replicate, then cached. Vote on what helps your study.
No study brief is cached for this law yet. Sign up to generate a plain-English brief.
Sign up to generate